HARMAN KARDON ASSUB
Manual de Usuario

AS Series Owner�s Manual

9/11/98 12:51 PM

Page 6

New Construction
�1-1/2" �1-1/2" �1-1/2"

Step One: Remove the grille from the speaker frame.

Step Two: Determine the correct speaker location.

Step Three: Attach the proper mounting brackets, marked and preset at 3/8" 1/2" 5/8" and 3/4" corre, , , , sponding to the thickness of the dry wall, to the speaker frame.

Step Four: Nail or screw the speaker-frame assembly to the wall studs and route the wires through the frame opening.

After the Drywall is Installed

Step Five: Cut the drywall.

Step Six: Connect the speaker wires to the baffle assembly and install baffle assembly in frame. Do not overtighten the baffle screws.

Step Seven: Replace the metal grille.